How to use hydraulic shears? It is necessary for people who use this machine for the first time to master it. If they don't master it well, they may not be able to use the hydraulic shear well, and even cause various problems due to improper operation in the process of use, thus affecting the normal operation of the shear. As for the hydraulic pendulum shear, first introduce its operation rules. We already know how it works. With rules, it's perfect.

1. Use of hydraulic shear

(1) Start the hydraulic plate shearer idling for several cycles to ensure that under normal conditions, try to shear the plates with different thickness from thin to thick, and ensure that users are familiar with the performance of the blade of the hydraulic plate shearer.

(2) During the shear test, different blade clearance must be adjusted for different plate thickness. If the corresponding blade gap is not aligned, the durability of the blade will be affected.

(3) In the cutting process of hydraulic shear blade, open the pressure gauge switch, observe the oil pressure value, and the pressure should be less than 20 MPa when cutting 12 mm plate.

(4) When leaving the factory, the pressure is set at 20-20-22ma. The user must abide by this regulation. It is not allowed to increase the cutting pressure beyond the specified material surface, thus causing damage to the machine.

(5) Sound balance during operation. If the blade of the hydraulic plate shearer has noise, please stop the machine for inspection.

(6) When the blade of hydraulic brake shearer is running, the oil tank rises