How does the shearer cut?

Blade movement and fixed blade, using a reasonable blade clearance, for all kinds of situations?

Sheet thickness shear, separate table, crack size as required.

Clipping is used to reduce the gap at the edge of a line. The cutting process should be able to ensure the linearity and parallelism of the cutting surface, and reduce the sheet distortion, so as to obtain high-quality workpiece.

The structure and working principle of the plate shear1. Start the working principle of the shear and fix the blade on the tool holder.

The second leaf and the third leaf are fixed on the lower bed surface, and the bed surface is equipped with five balls, so that table 6 is moved, the back 7 plates are positioned, and the position 8 is adjusted. In order to prevent the plate from being cut and overturned, the hydraulic cylinder 9 is used to clamp the plate. Shed 10 is a safety device to prevent such accidents.

Adjust the rebounding and pattern of the front baffle blades when they are in fierce confrontation with the rear baffle, and the pattern and fixation will be tense. Relax the baffle, remove the template, bedspread and cut.

Adjust the horizontal alignment of the damping blade, the model is modeled and fixed to the backboard again, delete the sample, and then install the plate shear.

Adjust the angle of the baffle. The model aligns the blades under the desktop. First adjust the angle of the baffle and fix it. Then adjust the back baffle according to the model. When cutting, use the baffle to locate the angle of the baffle.