In the movement of blade and fixed blade, reasonable blade clearance should be adopted for all kinds of blades?

The thickness of the cut sheet metal, a separate table showing the required crack size.

Shearing machine is used to reduce the blank of straight edge. The cutting process should be able to ensure the straightness and parallelism of the chip cutting surface, reduce the deformation of the plate, so as to obtain high-quality workpiece.

The structure and working principle of the shearing machine. The working principle of the shearer will be triggered and the blade 1 will be fixed on the tool holder.

2. The blade 3 is fixed on the upper surface of the bed, and there are five balls on the bed surface, so that the worktable 6 is sent to work, and the board 7 behind it locates the metal sheet and adjusts the locating pin 8. The hydraulic cylinder 9 is used to clamp the plate to prevent the plate from turning over during shearing. The shed plate 10 is a safety device for preventing industrial accidents.

(1) Adjust the front baffle blade to face the back plate and the model on the back baffle seriously, and it will be tense before the model is fixed. Release the liftgate and remove the template, bedspread and cut.

(2) After the adjusted damper blades are horizontally aligned, the model is re modeled and fixed on the back plate, the example is deleted, and then the plate is installed for shearing.

(3) Adjust the angle model of the baffle to make the blades align under the table. First adjust the angle and fixation of the baffle, and then adjust the rear baffle according to the model. In the shearing process, the baffle is used at the same time.